Sand 3D Printing The most complete on the net - SANDY TECHNOLOGY CO.

3dptek — Fri, 25 Oct 2024 07:34:37 +0000

In today's fast-moving manufacturing sector, sand mold 3D printers are emerging as the center of attention for many businesses. So why buy a sand mold 3D printer? What unique value and advantages does it bring to the table?

3DPTEK Sand Mold 3D Printer

II. Shortening the production cycle

The traditional sand mold production process is usually more cumbersome, need to go through the mold design, production, assembly and other aspects, consuming a lot of time. Sand mold 3D printer greatly simplifies this process, it can be directly based on the digital model of the sand mold layer by layer printing, without the need to make molds and complex assembly operations. This shortens the production cycle significantly, enabling companies to bring products to market faster and seize the first opportunity. Taking automobile manufacturing as an example, the development cycle of new models is often very tight, sand mold 3D printer can make sand molds for automobile engines and other parts in a short period of time, accelerating the trial production process, helping enterprises to verify and optimize their products faster, and improving the overall research and development and production efficiency.

III. Cost reduction

The purchase of a sand mold 3D printer requires a certain initial investment, but in the long run, it can bring significant cost reductions for enterprises. On the one hand, as mentioned earlier, it reduces the mold making and assembly in the traditional sand mold making process, reducing labor costs and mold costs. On the other hand, as 3D printing can realize high-precision manufacturing, it reduces the scrap rate and subsequent processing costs. In addition, 3D printing technology can also optimize the design of the sand mold, so that it meets the requirements of the premise of more lightweight, thus reducing the use of casting materials, further reducing costs. For some small batch but a variety of products for the enterprise, sand mold 3D printer cost advantage is more obvious, because it does not need to make a special mold for each product, greatly reducing the production cost and inventory pressure.

IV. High degree of design freedom

Sand mold 3D printers offer designers a high degree of design freedom. Traditional manufacturing processes are often limited by the structure of the mold and the manufacturing method, and designers need to consider many process factors when designing a product, thus compromising the design. 3D printing technology, on the other hand, breaks down these limitations and allows designers to give full play to their imagination and design more innovative and unique product structures. For example, they can design castings with complex internal runners to optimize product performance, such as improving heat dissipation efficiency or fluid flow performance. This increased design freedom not only helps companies develop more competitive products, but also promotes innovation in the industry as a whole.

V. Personalization

With the diversification of market demand and the trend of individualization becoming more and more obvious, personalized customization has become an important development direction of the manufacturing industry. Sand mold 3D printer can precisely meet this demand, it can according to the customer's specific requirements, quickly create a unique sand mold, to achieve personalized custom production. Whether it is a single piece of customization or small batch customization, sand mold 3D printer can easily deal with. This is important for some high-end equipment manufacturing, medical equipment and other fields.

VI. Environmental protection and sustainable development

In today's era of environmental protection and sustainable development, sand mold 3D printers also have certain advantages. The traditional sand mold production process will produce a large number of waste and pollutants, such as waste mold materials, chemical reagents, etc., causing greater pressure on the environment. The sand mold 3D printer in the manufacturing process is relatively more environmentally friendly, it is mainly used in sand and other environmentally friendly materials, and can be optimized through the design and printing parameters to reduce the waste of materials. In addition, because 3D printing technology can achieve precision manufacturing, reducing the production of scrap, further reducing the impact on the environment. Therefore, the purchase of sand mold 3D printers is in line with the company's environmental philosophy and social responsibility, and helps the company achieve sustainable development.

To sum up, purchasing sand mold 3D printer has many advantages, including high precision and complex structure manufacturing ability, shorten the production cycle, reduce costs, high design freedom, personalized customization and environmental sustainability. For modern manufacturing enterprises, sand mold 3D printer is not only a kind of advanced production equipment, but also an important tool to enhance the competitiveness of enterprises and realize innovative development and sustainable development. With the continuous progress of technology and the continuous expansion of the application, I believe that the sand mold 3D printer will play an important role in more areas, for the development of the manufacturing industry to bring new opportunities and changes. Therefore, when considering the production upgrade and development strategy of enterprises, the purchase of sand mold 3D printer is a choice worth serious consideration.

为什么要购买砂模3D打印�?/a>最先出现在三帝科技股份有限公司�?/p>

Sand 3D Printing The most complete on the net - SANDY TECHNOLOGY CO.

3dptek — Fri, 25 Oct 2024 05:50:45 +0000

In today's era of rapid development of science and technology, 3D printing technology with its unique advantages in various fields set off a wave of change, the foundry industry is no exception. The latest domestic sand 3D machine --3DPTEK-J4000 The introduction of ultra-large sand 3D printers has brought new vitality and vigor to the foundry industry, showing strong innovative power and broad application prospects. Here is an introductionDefinition and shopping for large format sand 3D printersThe article.

This sand 3D machine is a technological breakthrough. It adopts the sandbox-less flexible zone molding technology, an innovation that allows it to mold sand molds up to 4 meters in size, and can customize the extended printing platform according to the actual needs, even to meet the production needs of the 10 meter + level, and the 7 meter machine is now available for pre-order. This breakthrough breaks the traditional casting equipment in the size of the limitations, for the production of large castings to provide the possibility. In the past, the manufacture of large sand molds faced many difficulties, not only requiring huge equipment and complex processes, but also high costs and low efficiency. The emergence of 3DPTEK-J4000 has changed this situation, making the manufacture of large sand molds more convenient and efficient.

In terms of economic performance, this domestic sand 3D machine also has significant advantages. It breaks the conventional phenomenon that the larger the molding size of the equipment, the higher the price, 4 meters and larger size equipment and 2.5 meters equipment price difference. This means that companies can obtain larger sand molding capacity at a lower unit cost, significantly reducing production costs. At the same time, the shorter delivery time also improves productivity and enhances market competitiveness. In today's fierce market environment, cost and efficiency are the key factors for the survival and development of enterprises, 3DPTEK-J4000 undoubtedly provides strong support for foundry enterprises.

In terms of equipment parameters, 3DPTEK-J4000 also demonstrates its professionalism and advancement. The main body covers an area of 21000×7000×4000mm and weighs about 45t, such a huge body contains fine craftsmanship. The resolution of the nozzle is up to 400dpi, which can guarantee the precision and quality of the sand mold, and the molding thickness is between 0.2 - 0.5mm, which can meet the requirements of different castings. In terms of molding materials, it is compatible with quartz sand, ceramic sand and other materials, providing more choices for enterprises.

3DPTEK-J4000 The application areas are wide-ranging and cover a number of important industries such as aerospace / space, high voltage electrics, energy power, industrial machinery / marine pumps and valves, automotive (fuel / new energy) and many others. In the aerospace industry, high precision sand molding is essential for manufacturing complex aero-engine components and spacecraft structures. This sand molding 3D machine can meet the strict requirements of aerospace parts for precision and performance, providing strong technical support for the development of China's aerospace industry. In the automotive industry, whether it is a fuel-fired vehicle or a new energy vehicle, the manufacture of key components such as engine blocks and transmission cases requires high-quality sand molding. 3DPTEK-J4000 can be used to improve the manufacturing precision and efficiency of automotive parts, reduce production costs, and improve the overall performance and quality of the automobile.

3dptek-J4000 Sand 3D Printer

In addition, 3DPTEK-J4000 also focuses on after-sales service, good after-sales service is an extension of product quality, which can make users feel more at ease in the process of use, solve problems encountered in a timely manner, and ensure the smooth progress of production.

The appearance of the latest domestic large-size sand 3D machine 3DPTEK-J4000 is the result of the continuous innovation and development of China's manufacturing industry. With its advanced technology, superior performance, wide range of applications and perfect after-sales service, it brings brand new development opportunities for the foundry industry. Here is an article discussing in detail asWhat to buy sand 3D printerThe

In the future, with the continuous progress of 3D printing technology and the in-depth promotion of its application, I believe that this sand 3D machine will play an important role in more fields, promote the development of manufacturing industry to the direction of high-end, intelligent and green, and inject a new impetus for high-quality development. We also look forward to domestic 3D printing technology can continue to innovate, make more breakthroughs, in the international arena to show the strong strength of China's manufacturing industry.

Sand 3D Printing The most complete on the net - SANDY TECHNOLOGY CO.

3dptek — Wed, 23 Oct 2024 07:10:51 +0000

From a foundry's perspective, industrial sand 3D printers can deliver significant business value. Here are some of the key points that foundries are most concerned about:

Improve foundry efficiency

Reduced mold costs: With industrial sand 3D printing there is no need to make expensive molds, reducing overall production costs.
Increasing productivity: Additive manufacturing enables rapid production of sand molds and cores, shortening lead times and increasing productivity.
Reduced labor costs: Automated 3D printing of sand molds minimizes the labor costs associated with traditional manual molding and core making processes.

Improved accuracy and consistency: Industrial sand 3D printing ensures accuracy and consistency in the production of sand molds and cores, resulting in higher quality castings.

Reduced defect rate: Additive manufacturing minimizes the risk of human error, reducing defect rates and the need for rework or scrap.

Production of structurally complex parts: Sand 3D printing is capable of producing complex geometries and detailed designs that are difficult or impossible to achieve with traditional methods. Think back, don't you often come across pieces with very complex structures that are so costly or even impossible to produce using traditional casting methods that you end up having to give up on the order. With sand mold 3D printers, these are no longer problems.

Cost savings and competitiveness

Reduction of material waste: Industrial sand 3D printing minimizes material waste, reduces costs and lowers environmental impact.
Reduced production costs: Additive manufacturing can reduce production costs by as much as 50% compared to traditional methods.
Improving competitiveness: Foundries using industrial sand 3D printing can gain a competitive advantage in terms of cost, quality and delivery time.

Design for Additive Manufacturing: Industrial sand 3D printing enables foundries to produce complex designs that were previously impossible or impractical.

Rapid Prototyping and Production: Additive manufacturing enables rapid prototyping and production, allowing foundries to respond quickly to changing customer needs.

Production Flexibility: Sand 3D printing enables foundries to produce small batches or one-off castings, ideal for small production runs or prototyping.

Other key advantages

Improved security: Industrial sand 3D printing reduces the risk of accidents and injuries associated with traditional molding and coremaking processes.
environmental benefit: Additive manufacturing minimizes material waste, reduces energy consumption and enables the use of recycled materials.
Data-driven production: Industrial sand 3D printing enables data-driven production, enabling foundries to monitor and optimize their production processes in real time.

By adopting industrial sand 3D printers, foundries are able to increase efficiency, improve casting quality, reduce costs and increase competitiveness, ultimately realizing increased profitability and business success.

Sand casting 3D printer

Traditional foundries face a number of challenges and difficulties, including:

Tooling costs and lead times: Making molds and models is a time-consuming and expensive process that can take weeks or even months to complete.
Labor costs and shortages: Foundry work requires skilled labor, which may be difficult to find and retain in areas with labor shortages.
Material waste and energy consumption: Conventional casting processes lead to significant material waste and energy consumption, which can increase costs and have an environmental impact.
Quality control and defect rates: Achieving consistent quality and minimizing defect rates can be challenging, especially for complex geometries and high volume production.
Complexity and design constraints: Conventional casting methods make it difficult to produce complex geometries, fine designs and thin-walled castings.
Increased global competition: Foundries face increasing competition from low-cost producers in other regions, making it difficult to maintain profit margins.
Environmental and safety regulations: Foundries must comply with increasingly stringent environmental and safety regulations, which can be both time-consuming and expensive.
Customer demand for faster delivery: Customers are demanding shorter lead times and faster delivery, which can be difficult for traditional foundries to meet.
Fluctuations in production volume: Foundries are often faced with fluctuating production volumes, which can make it difficult to maintain efficiency and optimize resources.
technological obsolescence: Traditional foundries may struggle to keep up with technological advances, such as additive manufacturing, which may render their processes obsolete.

To overcome these challenges, many foundries are adopting new technologies, such as industrial 3D printing, to improve efficiency, reduce costs and increase competitiveness. SANDY Technology has introduced a number of specialized foundry-readySand 3D PrinterThe process covers SLS (selective laser sintering), binder jetting, and foundry partners can focus on it.

砂型铸�?D打印机在铸造业中的商业价�?/a>最先出现在三帝科技股份有限公司�?/p>

Sand 3D Printing The most complete on the net - SANDY TECHNOLOGY CO.

3dptek — Sat, 12 Oct 2024 09:12:04 +0000

Recently, the list of "2024 Global Foundry Industry Innovative Technology and Product Awards" was announced.Beijing SANDI Technology Co.(hereinafter referred to as "SANDY Technology") was honored as "2024 Global Foundry Industry Innovative Technologies and Products" for its self-developed large-size 3DP sand printer 3DPTEK-J4000.

The equipment breaks through the traditional processing size limitations, and can form sand molds of up to 4 meters. Innovative use of no sand box flexible area molding technology, support for local printing, only 2 meters + the price of the equipment, can be economically and efficiently realize the manufacture of sand molds of oversized (7 meters of equipment synchronization to accept reservations). At the same time, the company provides open-source material process, which can be adjusted according to the user's needs; supporting high-performance resin binder, curing agent, cleaning agent, to ensure the quality and stability of molding.

For more details, please pay attention to the "75th World Foundry Conference", which will be held in Deyang City, Sichuan Province on October 26-28, SANDY will bring 3D casting solutions (Booth No. B13) to the exhibition and make a wonderful sharing in the "2024 Global Foundry Innovation Technology and Product Launch" on the 27th. Innovative technologies and products conference" in the 27th to do wonderful sharing.

Chart:3D Casting Solutions

三帝科技4�?DP砂型打印机荣�?024全球铸造行业创新技术与产品榜单最先出现在三帝科技股份有限公司�?/p>

Sand 3D Printing The most complete on the net - SANDY TECHNOLOGY CO.

3dptek — Wed, 04 Sep 2024 02:07:04 +0000

In today's era of rapid development of manufacturing industry, traditional foundries are facing increasingly fierce market competition and constantly improving product quality requirements. As an innovative technology, sand 3D printers are becoming the key to improving competitiveness and upgrading foundries. This buyer's guide is designed to provide comprehensive, in-depth guidance to managers of traditional foundries to help them make informed purchasing decisions.

Read navigation

I. Understanding your own needs
Evaluation of key features of sand 3D printers
III. Cost and return on investment analysis
IV. Market research and brand selection
V. After-sales service and technical support
VI. Summary and recommendations
Leave a message online to get a quote for sand 3D printer

I. Understanding your own needs

Analyzing the current situation of factory production

Evaluation of traditional process: Carefully review the traditional casting process currently used in the factory, including the way the molds are made (e.g., wood molds, metal molds, etc.), the molding process (hand molding or machine molding), and the process of melting and pouring. Evaluate the time, labor, and material costs as well as the problems associated with each process. For example, traditional wooden mold making can take weeks and is prone to dimensional deviations and damage; hand molding is labor-intensive, inefficient and inconsistent in quality.
- Product Characterization: Define the type of castings that the plant will mainly produce, whether they are castings with simple structures or castings with complex internal cavities, thin-walled structures or finely curved surfaces. Determine the size range of the castings, from small castings of a few centimeters to large castings of several meters. At the same time, analyze the requirements for casting accuracy, for example, certain aerospace castings may need to be millimetre accurate or even higher. In addition, the material of the casting should be considered, which may vary from material to material in terms of casting process and equipment requirements.
- Production scale considerations: Evaluate the daily production scale of the plant, including monthly or annual casting production. Understand the characteristics of the production orders, whether it is a large number of single product production or small quantities of multi-species production. For the peak and trough production capacity changes also need to have a clear understanding, which will affect the selection of equipment and production arrangements.

3DPTEK-J1600Pro Sand Mold 3D Printer

Defining goals and desired improvements

Cost control objective: If cost reduction is the main objective, the cost composition of each link needs to be analyzed. Mold production costs account for a large proportion of the traditional process, and sand 3D printers can eliminate the mold production process, significantly reducing this part of the cost. At the same time, considering labor costs, 3D printers have a high degree of automation, which can reduce the reliance on labor. In terms of material costs, although 3D printing requires specific sand and binder, material utilization can be improved by precisely controlling the amount of material used, and waste can also be reduced through the re-cycling of sand. In addition, the 3D printing process can optimize the structure of sand molds and reduce the amount of sand used through lightweight design. For example, for a medium-sized foundry, by introducing sand 3D printers, the cost of molds may be reduced by 40%, the labor cost by 30%, and the material cost savings by about 20%.
- Efficiency Improvement Requirement: For foundries pursuing productivity improvement, focus on the molding speed of the equipment. Sand 3D printers can print a complex sand pattern in a few hours, compared with the traditional mold making and molding weeks, a significant increase in efficiency. In addition, 3D printers can print multiple sand molds at the same time, or zone printing on a large sand mold, greatly reducing the overall production cycle. For example, after the introduction of 3D printers in an automotive parts foundry, the product development cycle has been shortened from several months to a few weeks, and production efficiency has been increased by more than 50%.
- Quality Improvement Expectations: The ability of sand 3D printers to print with high precision is critical when higher quality products are required. It can precisely control the size and shape of the sand mold, reducing dimensional deviations and surface defects in the castings. At the same time, due to the stability and consistency of the printing process, it can improve the internal quality of castings and reduce defects such as porosity and slag entrapment. For example, in some high-end equipment manufacturing fields, the scrap rate of 3D printed sand castings has been reduced from 10% in the traditional process to less than 2%, and the product quality has been greatly improved.
- Flexibility enhancement direction: for foundries that need to respond to small batch, multi-variety production needs or personalized custom orders, the advantages of sand 3D printer is particularly obvious. It does not need to make physical molds, can be quickly switched to produce different products according to the digital model, greatly improving the flexibility of production. For example, some art foundries or customized parts production enterprises, through the 3D printing technology can meet the diverse needs of customers, broadening the market space.

Evaluation of key features of sand 3D printers

Printing Accuracy

Impact of precision on casting quality: Printing precision directly determines the dimensional accuracy and surface quality of castings. High-precision printing can ensure that the dimensional deviation of the castings is within a very small range and meet the strict assembly requirements. In terms of surface quality, high-precision printing can reduce the roughness and defects on the surface of the casting and improve the appearance quality of the casting. For example, in the production of key components such as engine blocks, high-precision sand molding can ensure the precision of the fit between the piston and the cylinder block and improve the performance and reliability of the engine.
- Choosing the right precision equipment: First, the required precision level is determined according to the design requirements and usage scenarios of the product. For some common mechanical parts, millimeter-level accuracy may be sufficient; while for high-precision castings in aerospace, medical devices and other fields, sub-millimeter or even higher accuracy may be required. Secondly, understand the precision parameters of different devices, including layer thickness and dimensional error range. You can refer to the technical information and actual test data provided by the manufacturer, while exchanging experiences with other users. For example, 3DPTEK sand 3D printers are capable of achieving a dimensional accuracy of ±0.3mm, which is suitable for the production of castings with high accuracy requirements.
- Comparison of different precision level equipment and applicable scenarios: low-precision equipment is usually relatively low-priced, applicable to some production scenarios that do not require high precision and focus on cost control, such as ordinary construction machinery castings. Medium-precision equipment balances price and performance, and is suitable for the production of most industrial parts. High-precision equipment, on the other hand, is suitable for high-end manufacturing areas, such as aerospace, precision instruments, etc., but the price is relatively high. For example, in the production of automobile engine cylinder head, medium-precision equipment can meet the basic production requirements; for aero-engine blades and other high-precision castings, you need to choose high-precision equipment.

Print Size

Print size in relation to production scale and casting size: For large foundries, equipment capable of printing large castings is often required to meet production demands. For example, in the production of large ship engine block, may require several meters or even larger size printing equipment. For small foundries or production of small castings of enterprises, the smaller size of the equipment may be more economical and practical. At the same time, the print size also affects the footprint and space requirements of the equipment, which need to be taken into account in factory planning.
- Selection strategy: according to the factory's production planning and market positioning to determine the required print size. If the main production of large castings, you need to choose a larger print size of the equipment; if the main small castings, you can choose small or medium-sized equipment. Also consider the future development needs, set aside a certain amount of capacity expansion space. In addition, pay attention to whether the equipment print size can be flexibly adjusted, for example, some equipment can be replaced by the printing platform, or even no sand box printing to adapt to the production of castings of different sizes. For example, a medium-sized foundry plans to expand into the field of large-scale casting production in the future, then in the selection of equipment, you can give priority to those with upgradable print size or modular design of the equipment in order to expand in the future according to demand.

The importance of stable operation of equipment: in casting production, the stability of equipment is crucial. Once the equipment failure, it may lead to production interruption, affecting the delivery date, and bring great economic losses to the enterprise. Especially for the continuous production of foundry, equipment for a long time stable operation is to ensure production efficiency and product quality basis. For example, in the automotive parts casting production line, if the 3D printer frequently fails, it will lead to production line stagnation, affecting the whole car production schedule.

Examine methods of stability and reliability:
Check the manufacturer's quality control system: understand the manufacturer's production quality management process, including raw material procurement, parts processing, assembly and commissioning and other aspects of quality control measures. A manufacturer with a perfect quality control system is usually able to produce more stable and reliable quality equipment. For example, some well-known manufacturers of each component are strictly quality testing to ensure that it meets the high standards of quality requirements.

User Word of Mouth: Communicate with users who have already used the device to understand their evaluation of the stability and reliability of the device. The actual use experience of users is the most direct and real feedback. You can participate in industry exhibitions, join professional communities and other ways to establish contact with other users to get their opinions and suggestions. For example, some foundries will prioritize those brands with good reputation in the same industry when choosing equipment.

Software Support

Excellent software features and functions:
- Model Processing: Powerful 3D printing software can efficiently process complex casting models, including model repair, optimization, slicing and other functions. For example, for some models imported from CAD software that may be defective or unsuitable for printing, the software can automatically detect and repair these defects to ensure that the model can be printed smoothly.
- Printing parameter setting: The software should provide a wealth of printing parameter setting options, such as printing speed, layer thickness, nozzle temperature, binder dosage and so on. Users can according to different casting requirements and material properties, precise adjustment of these parameters to obtain the best printing results. For example, for thin-walled castings, it may be necessary to adjust the layer thickness and printing speed to ensure the strength and precision of the sand mold.
- Production process management: the software should also have production process management functions, including order management, task scheduling, equipment monitoring. This can help foundries realize efficient production management and improve production efficiency. For example, through the software can real-time monitoring of the operating status of the equipment and printing progress, rationalize the arrangement of production tasks to avoid production congestion.
- Evaluate software for ease of use, functional integrity, and compatibility with devices:
  - Ease of use: the operating interface of the software should be simple and clear, easy to get started. With an intuitive graphical interface and clear operating procedures, even non-professional technicians can quickly master. Ease of use can be assessed by trying out the software or viewing a demo video of the software in action. For example, some software adopts a wizard-type operation process, users only need to follow the prompts step-by-step operation to complete the entire printing process.
  - Functional completeness: Check whether the software has the basic functions mentioned above such as model processing, printing parameter setting, production process management, and whether there are some special features such as automatic optimization algorithms, remote control and so on. The more complete the function, the higher the applicability and flexibility of the equipment. For example, some software has intelligent optimization algorithms, which can automatically adjust the printing parameters according to the shape and structure of the casting to improve printing efficiency and quality.
  - Compatibility: Ensure that the software has good compatibility with the device and can drive the device stably for printing. Also consider the compatibility of the software with other design software, such as CAD software, for smooth model import and processing. You can check the software's technical documentation or consult with the manufacturer to find out what file formats and software interfaces it supports. For example, some software supports common file formats such as STL, OBJ, etc., and can work seamlessly with most CAD software.

III. Cost and return on investment analysis

Equipment purchase costs

Price range for different brands and configurations: The price of sand 3D printers varies depending on the brand, technology level, print size, accuracy and other factors. Generally speaking, the price of equipment from European and American brands is relatively high, and may be in the millions or even tens of millions of dollars; the price of equipment from Chinese brands is relatively low, and may range from hundreds of thousands of dollars to millions of dollars depending on different configurations. For example, some high-end European and American equipment with advanced technology and excellent performance, but the price is very expensive; and some of China's emerging brands of equipment in the price-performance ratio is more advantageous, such as 3DPTEK, this brand is more famous in China, the equipment is very cost-effective, while 3DPTEK operates its own almost 10 foundries, but also dozens of foundry enterprises in China to provide Equipment, it can be said that the market has been strictly verified, is a very good choice.
- Analysis of the reasons for price differences:
  - Technology level: Advanced printing technology, high-precision control system, stable mechanical structure, etc. will increase the cost of the equipment. For example, equipment using laser sintering technology is usually more expensive than equipment using ordinary binder jetting technology, because laser sintering technology offers higher precision and better sand strength.
  - Brand influence: well-known brands usually invest more in research and development, production, after-sales service, etc., and their brand value will also be reflected in the price of equipment. Some brands with many years of industry experience and good reputation, often able to provide more reliable equipment and better service, but the price is also relatively high.
  - After-sales service: perfect after-sales service system, including equipment installation and commissioning, training, maintenance, technical support, etc., will increase the manufacturer's operating costs, which is reflected in the price of equipment. Some manufacturers provide 24-hour online technical support, rapid response maintenance services, etc., which will have an impact on the price.

operating cost

Cost of supplies:
- Sand: Sand used in sand 3D printers typically needs to meet certain grain size, shape, and strength requirements. Prices for different qualities of sand vary and fluctuate with market supply and demand. For example, some high-strength, low-dust specialty sands may be relatively expensive, but can improve the quality of the sand pattern and printing results.
- Binder: Binder is the key material to bond the sand together to form the sand mold, and its price will also affect the operating cost. Different types of binder differ in performance and price, and need to be selected according to actual needs. At the same time, the amount of binder will also affect the cost, some advanced printing technology can reduce the amount of binder used to reduce costs.
- Energy consumption cost: the equipment will consume electricity during operation, and its energy consumption cost is related to the power of the equipment, running time, electricity price and other factors. When choosing equipment, you can focus on the energy efficiency ratio of the equipment and choose energy-saving equipment. For example, some devices use advanced energy-saving technologies that can reduce energy consumption under the premise of ensuring print quality. High-power devices usually consume more energy per unit of time, and if the device runs continuously for a long time, the cost of energy consumption will increase significantly. And the difference in electricity prices in different regions will also have an impact on the cost, such as industrial power consumption in concentrated areas may have certain preferential policies on electricity prices, need to take these factors into account to accurately assess the cost of energy.
- Equipment Maintenance Costs: Regular maintenance and upkeep of equipment is necessary to ensure its normal operation and incurs certain costs. Including the replacement of wearing parts, equipment cleaning, calibration and other aspects of the cost. Some manufacturers will provide equipment maintenance service packages, foundries can choose according to their own situation. At the same time, the reliability and stability of the equipment will also affect the maintenance costs, low failure rate of the equipment maintenance costs are relatively low. For example, some equipment using high-quality components and advanced design, reducing the frequency of replacement of wear parts, reducing maintenance costs.

Return on investment assessment

Cost savings analysis:
- Mold Cost Savings: As mentioned earlier, the cost of making molds in a traditional casting process is high, whereas sand 3D printers eliminate the need to make physical molds, which can significantly reduce this cost. Mold cost savings can be assessed by calculating the difference between the cost of making a traditional mold and the cost of 3D printing a sand mold. For example, a complex casting can cost tens of thousands of dollars to make the mold, whereas with a 3D printed sand pattern, this cost can be reduced by more than 80%.
- Labor Cost Savings: Due to the high degree of automation in 3D printers, the reliance on labor is reduced. Labor cost savings can be calculated by comparing the amount and cost of labor in a traditional process to the labor requirements with the adoption of 3D printing. For example, a traditional casting line may require dozens of workers for mold making, molding, etc., whereas with the adoption of 3D printers, only a few operators may be needed for equipment monitoring and maintenance, and labor costs can be reduced by about 50%.
- Material Cost Savings: Material costs can be reduced by accurately controlling the amount of material used and improving material utilization. For example, while traditional molding processes may produce large amounts of waste sand and scrap, 3D printing can reduce waste by accurately controlling material usage based on the model. At the same time, some 3D printed materials can be recycled, further reducing costs.
- Increased revenue from efficiency gains:
  - Reduced cycle time: Sand 3D printers can significantly reduce product development and production cycles. For some products that need to be on the market urgently, early delivery can result in a higher market price and competitive advantage. The value of the efficiency gains can be assessed by calculating the additional benefits of delivering products earlier. For example, by adopting 3D printing technology, an automotive parts foundry shortened the development cycle of new products from 6 months to 2 months, and entered the market ahead of schedule, gaining a higher market share and sales revenue.
  - Increased capacity: Efficient operation of the equipment and rapid prototyping capabilities can increase the capacity of the plant, thereby increasing sales revenues. The increased capacity and corresponding sales revenue can be projected based on the plant's production schedule and market demand. For example, if a foundry was producing 1,000 castings per month and the introduction of 3D printers increased capacity to 1,500 castings, and assuming a profit of $100 per casting, the increase in profit would be $50,000 per month.
- Calculation of the payback cycle: The feasibility of the investment is assessed by calculating the payback cycle, taking into account factors such as equipment purchase costs, operating costs, cost savings and increased revenue. The payback cycle refers to the time it takes from the time the equipment is put into use to the time it takes to recover the full investment. For example, assuming that the purchase cost of a sand 3D printer is $2 million, and that cost savings and increased revenue total $800,000 per year, the payback cycle will be about 2.5 years. The potential impact of market changes, technology updates, and other factors on the payback cycle also needs to be considered in order to make a more accurate assessment.

IV. Market research and brand selection

Collecting market information

Industry exhibitions: Attending foundry industry exhibitions at home and abroad is an important way to get information about the sand 3D printer market. The exhibition can directly contact with many equipment manufacturers to understand their latest products and technologies. At the exhibition, you can have in-depth communication with the technical personnel and sales staff of the manufacturers to obtain detailed product information and quotations. At the same time, you can also observe the live demonstration of the equipment, visualize the performance of the equipment and the operation process. For example, in some large international foundry exhibitions, there will be well-known manufacturers from all over the world to display their latest equipment and technology, providing foundries with a wealth of choices.
- Professional websites: there are many professional casting equipment websites and industry forums, which gather a large amount of equipment information, user reviews and technical articles. By browsing these sites, you can understand the characteristics of different brands of equipment, user feedback and market trends. Some sites also provide equipment comparison and selection tools to help users better choose the right equipment for themselves. For example, on some professional websites, you can find detailed parameter comparisons of different brands of sand 3D printers and real user reviews, which provide reference for purchasing decisions.
- User forums: Join user forums or communities in the foundry industry to exchange experiences with other foundry users. These users usually share their actual experience of using different equipment, the problems they encountered and the solutions. Their experiences and suggestions are very valuable for new users and can help avoid some common mistakes and pitfalls. For example, in some forums, users will share information about the actual use of the equipment, the quality of after-sales service, etc., which can provide reference for other users when choosing equipment.

Assessing brand reputation

Manufacturer qualifications: Check the qualification certificates and honorary awards of the equipment manufacturers to understand their status and influence in the industry. For example, some national specialties and new "small giants" enterprises, high-tech enterprises, with ISO quality management system certification, etc., these qualifications prove that the manufacturer's strength in technology research and development, production management and other aspects. Honors and awards, such as the industry's scientific and technological innovation awards, excellent product awards, etc., also reflects the manufacturer's products in the technology and quality has been recognized.
- Production experience: Manufacturers with rich production experience are usually more secure in product quality and after-sales service. You can find out how long the manufacturer has been engaged in the production of sand 3D printers, the scale of production and past project experience. A manufacturer that has been in the industry for many years and has provided equipment and solutions to many foundries is often more trustworthy. For example, certain manufacturers have been in the 3D printing and casting field for decades and have accumulated a wealth of experience, enabling them to provide personalized solutions based on the needs of different foundries.
- Technology R&D strength: focus on the manufacturer's technology R&D investment and innovation ability. Advanced technology is a guarantee of equipment performance and quality, whether the manufacturer has its own R & D team, patented technology and cooperation with scientific research institutions can be used as a basis for assessment. For example, some manufacturers continue to invest in R & D funds, the introduction of new printing technology and features to meet the changing needs of the market, such manufacturers are more forward-looking in technology.
- Market share and user evaluation: Knowing the market share of the brand's equipment can reflect its popularity and competitiveness in the industry. At the same time, by checking the evaluation of other users, you can get the real feedback about the quality, performance and after-sales service of the equipment. You can search online for user reviews, consult industry experts or directly contact other foundries to learn how they feel about the use of the brand's equipment. For example, if a brand of equipment in the market has a high share and the user evaluation is generally good, then it means that the brand is excellent in all aspects.

Field inspection: If the conditions allow, it is recommended to go to the equipment manufacturer for field inspection. You can visit the manufacturer's production workshop to understand its production process, quality control process and the advanced degree of production equipment. Observe whether the manufacturer's production management is standardized, and how the technical level and work attitude of the staff. At the same time, you can also have an in-depth communication with the technicians and managers of the manufacturers to understand their technical strength and service concept. For example, in the production workshop, you can check the assembly process of the equipment, the quality of the parts and the quality inspection link in the production process.

Prototype testing: Seeking to conduct prototype testing is a very important step. Prototype testing at the manufacturer or your own factory, inputting the actual casting model into the equipment, observing the printing process of the equipment, the quality of the sand mold, and the stability and reliability of the equipment. Through the prototype test, you can visualize whether the equipment meets your production needs and quality requirements. In the testing process, pay attention to record the printing time, sand accuracy, surface quality and other key data, and compare them with the technical parameters provided by the manufacturer. For example, you can prepare some representative models of complex castings for testing and observe the performance of the equipment in handling complex structures. Remember, this is very important, if you temporarily can not visit the site, even if you have to pay the cost (pieces are not big, generally manufacturers will be free to play, or at cost to help you play) but also to strive to let the manufacturer to print samples, which is the most intuitive understanding of the equipment.

V. After-sales service and technical support

After-sales service content

Equipment installation and commissioning: the installation and commissioning of the equipment is the basis for ensuring the normal operation of the equipment. Excellent after-sales service should include a professional installation team to ensure that the equipment can be properly installed and initial commissioning and calibration. During the installation process, the basic structure and operation methods of the equipment should be explained to the user so that the user can initially understand the equipment. For example, the installers will reasonably arrange the installation position of the equipment according to the actual layout of the factory and the production demand, and carry out the connection and debugging of electrical and mechanical aspects.
- Training: Comprehensive training services are crucial for users. The training content should include the operating skills of the equipment, the use of software, routine maintenance knowledge and common troubleshooting methods. Training can be divided into on-site training and online training in two forms to meet the needs of different users. For example, on-site training can be carried out after the completion of equipment installation, face-to-face guidance by professional trainers; online training can be through video tutorials, online classrooms and other ways to allow users to learn anytime, anywhere.
- Maintenance: Timely and efficient maintenance service is the guarantee of long-term stable operation of the equipment. After-sales service should include regular equipment maintenance, such as cleaning, lubrication, inspection, etc., as well as in the event of equipment failure can quickly respond and repair. Manufacturers should provide sufficient spare parts inventory to ensure that damaged parts can be replaced in a timely manner during the maintenance process. For example, when equipment malfunctions, the after-sales service team should arrive at the site within a specified period of time to diagnose and repair the problem and minimize the impact of equipment downtime on production.
- Software upgrade: With the continuous development of technology, the software of the equipment also needs to be upgraded and optimized. After-sales service should include regular software upgrade services to improve the performance and functionality of the equipment. Software upgrades can be carried out remotely through the network or by technicians at home to ensure a smooth and safe upgrade process. For example, the new software version may add some new functions, such as optimizing printing algorithms, improving printing speed and precision, etc., to bring users a better experience.

Solving technical problems: In the process of using the equipment, you may encounter various technical problems, such as the optimization of printing parameters, the improvement of the quality of the sand pattern, and the compatibility problems with other equipment. Professional technical support team can provide timely solutions to help users solve these problems and ensure smooth production. For example, when encountering the problem of substandard printing accuracy, the technical support staff can analyze the printing parameters, equipment status and other factors to give the corresponding adjustment recommendations to improve printing accuracy.
Optimized printing parameters: Different castings and production environments may require different printing parameter settings. Technical support personnel can provide optimized printing parameters according to the specific needs of the user and the actual situation, in order to achieve the best printing effect and production efficiency. For example, for some complex structure castings, technical support personnel can adjust the layer thickness, nozzle moving speed, binder dosage and other parameters according to its characteristics to improve the quality and strength of the sand mold.

Provide process improvement suggestions: With the accumulation of production experience and technological progress, process improvement is an important way to improve production efficiency and product quality. The technical support team can provide suggestions and solutions for process improvement according to the latest development of the industry and the actual situation of users. For example, by optimizing the production process and improving the molding method, etc., the overall production level of the foundry can be improved.

VI. Summary and recommendations

Clear demand: Before purchasing, you must have a clear understanding of the current production status of their own factories, product characteristics, development planning, etc., clear their needs and expectations of the direction of improvement, so that you can choose the most suitable for their own equipment.
Comprehensive assessment of equipment characteristics: from the printing accuracy, print size, device stability, software support and other aspects of the equipment to carry out a comprehensive assessment to ensure that the performance of the equipment can meet the production requirements.
Consideration of cost and return on investment: not only should we focus on the purchase cost of the equipment, but we should also give full consideration to factors such as operating costs, cost savings and increased revenues, and calculate the return on investment cycle to ensure the feasibility of the investment.

Emphasis on brand reputation and after-sales service: choose manufacturers with good brand reputation, rich production experience and strong technical research and development strength, and at the same time to ensure that manufacturers can provide perfect after-sales service and technical support.

Encourage informed decision-making

Traditional foundry in the face of equipment renewal and technological upgrading, to be brave enough to try new technologies, new equipment. Sand 3D printer as an innovative technology, can bring great changes and enhancement for the foundry. However, when making a purchase decision, we should consider all aspects of the factors, conduct sufficient market research and analysis, and manufacturers to carry out in-depth communication and exchange.

It is hoped that managers of traditional foundries can make wise purchasing decisions based on this buying guide, taking into account the actual situation of their own factories, introducing sand 3D printers suitable for them, enhancing the competitiveness of their factories, realizing sustainable development, winning the first opportunity in the wave of digital transformation, and injecting new vitality into the development of the foundry industry.

Leave a message online to get a quote for sand 3D printer

砂型3D打印机购买指�?/a>最先出现在三帝科技股份有限公司�?/p>

Sand 3D Printing The most complete on the net - SANDY TECHNOLOGY CO.

3dptek — Tue, 20 Aug 2024 01:02:20 +0000

China's foundry industry is large, stable growth rate, and occupies an important position in the global market. However, high pollution, high energy consumption and the development of the technical level is not high problems need to be solved. The "14th Five-Year Plan" for the foundry industry pointed out the direction of digital upgrading, especially in the aerospace industry, the depth of integration in the field of high-end manufacturing, but also high expectations. General Secretary Xi Jinping has repeatedly put forward to speed up the construction of "aviation power" for the development of China's aviation industry in the new era has raised expectations and pointed out the direction.

August 10, by the 27 provinces (cities, autonomous regions) 4 cities Foundry Society and the Hong Kong Foundry Industry Association hosted the 23rd National 27 provinces (cities, autonomous regions) 4 cities and 1 region casting academic conference was held in Guiyang. The meeting focused on the theme of "aerospace - casting strong country", from the national school / association of experts, leaders and entrepreneurs on behalf of more than 200 people gathered together to talk about the development of the industry. Beijing SANDI Technology Co., Ltd. participated in the co-organization of the conference.In the forum of the conference on the morning of the 10th, Dr. Zong Guisheng, Chairman of the Board of Directors of Beijing SANDI Technology Co., Ltd. made a keynote report titled "3D Printing Empowers Casting". Dr. Zong Guisheng proposed that the core mark of advanced manufacturing technology is low cost, high efficiency and quality. Compared with the traditional casting process, 3D printing technology in the field of high-end complex structural casting with efficiency, cost and quality advantages. In the report, Dr. Zong Guisheng through the demonstration of the use of three emperor technology SLS coated sand core and 3DP resin sand shell combined with 3D printing composite process, the manufacture of aero-engine key components of the casting of the combination of sand molds, to achieve the large size of the thin-walled, complex and fine piping and other complex structural components of the 3D casting applications, as well as the use of three emperor technology 3DP sand combined with low-pressure precision casting technology and advanced Solidification control process, to achieve large-size thin-walled structure and complex runners of an underwater vehicle power unit key parts of the 3D casting applications, in-depth description of the 3D printing technology in sand casting applications in cost, quality, environmental protection, intelligence and other advantages.On the evening of 10th, "3D Empowerment" SANDI Technology Night Reception hosted by Beijing SANDI Technology Co., Ltd. was held in Guiyang Qunsheng Haosheng Hotel.Photo: Zhao Jin, Dean of the School of Mechanical Engineering, Guizhou University, gave a speech for the dinner partyPhoto: Dr. Zong Guisheng, Chairman of Beijing SANDI Technology Co.Figure: Yan Qun, General Manager of Guangxi Zhongyue Gravity Casting Co.Photo: Dr. Zong Guisheng and President Zhao Jin presenting prizes to the winners of the on-site raffleSANDI Technology independent research and development launched 4 meters + level of super-large size 3DP sand printer has become the dinner scene of the newest net red, the current amount of potential purchase intention of 40 million yuan. The equipment breaks through the traditional processing size limitations, the maximum molding 4 meters of sand, and creative use of the sand box without flexible regional molding technology, breaking the phenomenon of the larger the size of the equipment molding, the more expensive the equipment price, 4 meters of the equipment is only the price of the 2 meters + level of equipment, with lower unit costs and shorter delivery time, cost-effective realization of the oversized sand manufacturing, and can be customized to expand the printing platform to meet the 10 meters + level, and can be used to meet the user's needs on-demand! Customized extension of the printing platform to meet the production needs of the 10 m + level (6 m / 8 m / 10 m equipment has been in the synchronization of accepting reservations). At the same time, the company provides open source material process, can be adjusted for the user on demand; supporting high-performance resin binder, curing agent, cleaning agent, to ensure the molding quality and stability.Picture: 3D Printing Technology's "One Million Promotions Scheduled for Reduction" photo card activity, attracting many guests to participate [About 3D Printing Technology] Beijing 3D Printing Technology, Inc. is a 3D printing equipment and additive manufacturing service provider, national high-tech enterprises, specialized and special new enterprises, the Ministry of Industry and Information Technology, additive manufacturing typical application scenarios supplier. Ltd. is a 3D printing equipment and additive manufacturing service provider, a national high-tech enterprise, a specialized, refined, special and new enterprise, and a typical application scenario supplier of additive manufacturing of the Ministry of Industry and Information Technology. At the same time has a laser and binder jet 3D printing equipment and materials technology and application process, business covers 3D printing equipment, raw materials development and production, metal parts rapid manufacturing services, 3D printing process technology support services, etc., to establish a complete 3D printing additive manufacturing industry chain, widely used in aerospace, ships, pumps and valves, automotive, energy and power, industrial machinery, rail transportation, 3C electronics, education and scientific research, sculpture and cultural creation, rehabilitation and medical industries.

三帝科技3D打印设备意向订单�?000万，助力�?3届铸造学术会议举�?/a>最先出现在三帝科技股份有限公司�?/p>

Sand 3D Printing The most complete on the net - SANDY TECHNOLOGY CO.

3dptek — Mon, 01 Jul 2024 06:14:58 +0000

SANDY TECHNOLOGY Booth: Hall 4.1H, 4F05

The 22nd China International Foundry Expo will be held on July 4, 2024 in Shanghai - National Convention and Exhibition Center (No. 333, Songze Avenue, Qingpu District, Shanghai), Beijing SANDY Technology Co. In order to return the support of the majority of users, our company proudly launched the "million subsidies, booking discount" new promotional activities! During the exhibition period, the booking of oversized casting sand printer 3DPTEK-J4000 and above size models, 100,000 off, limited to 10, welcome inquiries and orders!

The final interpretation of the rules of this promotion belongs to Beijing SANDI Technology Co.

Ultra-large size 3D casting sand printer 3DPTEK-J4000

SANDI Technology's self-developed oversized 3DP sand printer 3DPTEK-J4000 breaks through the traditional processing size limitations, the maximum molding 4 meters of sand. The device creatively adopted the sandbox-free flexible area molding technology, breaking the phenomenon that the larger the size of the equipment molding, the more expensive the equipment. With lower unit cost and shorter delivery time, cost-effective realization of oversized sand manufacturing, and can be customized according to user needs to expand the printing platform to meet the production needs of the 10 m + level (6 m/8 m/10 m equipment has been in the synchronization of accepting reservations).

In order to meet the diversified market demands, SANDY Technology has self-developed and launched full-size 3DP casting sand printers, SLS casting sand/wax printers and PMMA wax printers, which help users maximize their productivity with lower cost per unit and shorter delivery time.Introduction of English version of sand 3D printer

Figure: 3DP Casting Sand Printer

Figure: SLS Casting Sand/Wax Printer

Additive manufacturing services (3D casting)

With nearly 30 years of experience in 3D printing service and casting, based on the integrated technology process of "process design, 3D printing, casting, machining and testing", SANDI can provide high-quality R&D trial production, small-lot, multi-species, complex structure of metal products rapid manufacturing services. Through self-developed 3DP inkjet sand molding, SLS selective laser sintering, PMMA and other 3D printing equipment, the company has formed a full set of process solutions, such as 3DP sand casting, SLS sand casting, SLS wax mold fine casting, PMMA fine casting and so on. We can provide users with rapid manufacturing services for aluminum alloy, copper alloy, cast iron, cast steel, magnesium alloy, high-temperature alloy, titanium alloy and so on.

"SLS+3DP" sand composite process

The company's unique "SLS coated sand molding process + 3DP resin sand molding process" combination of sand mold manufacturing, complex structural components (large, thin-walled, small pipelines, etc.) can be realized in high-precision, high-strength integrated casting molding, the process has been selected by the Ministry of Industry and Information Technology of the typical application of additive manufacturing scenarios.

3DP sand casting process

No need to open the mold, can realize the large, thin-walled, fine pipeline, complex structure parts of the high-precision and high-strength integrated casting molding. Short production cycle, small batch production advantage is obvious, design flexibility, can be modified in time, reduce production costs. Improve the production environment, reduce labor intensity, save labor costs, greener, smarter.

SLS wax casting process

No need to open the mold, can realize the complex structure, thin-walled, large size products of high precision and high strength integrated precision casting molding. Short production cycle, small batch production advantage is obvious.

PMMA wax mold casting process

Significantly shorten the processing cycle, reduce production costs, no need to open the mold and add support, no warping and deformation in the molding process, reduce the post-treatment steps, and high molding accuracy. The company's self-developed materials with strong disappearance and low ash content can reduce casting defects and improve the yield rate, which has been successfully applied in the casting industry.

Contact: Manager Han

Contact: 13811566237

Website:srqwj.com

Address: Building 2, No.7 House, Jin Yi Street, Shunyi District, Beijing, China

百万补贴预订立减丨三帝科技3D铸造解决方案将登陆中国国际铸造展最先出现在三帝科技股份有限公司�?/p>

Sand 3D Printing The most complete on the net - SANDY TECHNOLOGY CO.

3dptek — Mon, 26 Jun 2023 06:46:00 +0000

Casting is the fundamental manufacturing industry, the development of the foundry industry is a key part of the national strategy. The state attaches great importance to the development and layout of the foundry industry, "14th Five-Year Plan" plan clearly to digital transformation and development goals: by 2025, the use of 3D printing technology to produce more than 500,000 tons of castings; the realization of the demonstration of inorganic binder and other green molding materials; foundry sand recycling to reach more than 8 million tons of recycling; Cultivate more than 200 green casting factories. In April this year, the three ministries and commissions of the joint release also proposed to promote the integration of die casting forming, moldless casting, sand 3D printing and other advanced process technologies to achieve industrialization and application.

As the world's first casting country, China's casting industry has a market size of about 400 billion, accounting for 45% globally; there are more than 24,000 foundries, with a total output of 51.7 million tons of castings in 2022, which maintains a steady growth. But at the same time there are problems of overcapacity, high energy consumption, high pollution, not strong, not refined, energy saving and emission reduction pressure, shortage of skilled workers, weak independent innovation, and serious homogenization competition. According to statistics, the national casting annual output of more than 10,000 tons of casting enterprises more than 1,000, more than 50,000 tons of nearly 200 enterprises. Head of more than 2,000 casting production accounted for more than 55% of the total national capacity. The head of the lack of customization or small batch trial production capacity, the development of new products is slow, high cost; "long tail" low capacity utilization, most of them to be eliminated; only the "long tail" in the head of the enterprise, relying on 3D printing and automation rate increased after Only the head of the "long tail" enterprises, after relying on 3D printing and automation rate increase, can survive, and there may be several times the concentration of the space.
Driven by policy, market and technology, 3DP sand printing technology has emerged. 3DP sand printing technology is a digital green manufacturing technology based on digital model files, using powdered metal or non-metallic and other adhesive materials, layer by layer printing to construct objects. Compared with traditional sand casting, 3DP sand printing technology does not require molds, direct printing sand, design flexibility, can be low-cost, efficiently complete the development of new products and small and medium-volume product delivery, rapid response to market demand. In terms of quality, 3DP sand mold is not subject to the constraints of the mold sand turning process, with micron-level high precision, complex structure of one free-form, part of the cast aluminum casting surface accuracy can be comparable to precision casting, but also reduces the assembly error caused by the scrap rate, reducing the labor of workers.

At present, 3DP sand printing technology has been matured in the casting production of commercialized applications, is a real market-proven universal technology. Its optimization of sand performance, processing speed, molding size, etc. to enhance the obvious advantages, especially for new product development, complex products and small batch production. Some of the introduction of 3DP sand printing equipment for intelligent transformation of foundry enterprises, has established a green, flexible, high-end rapid casting capabilities, to achieve production efficiency, capacity, revenue doubling growth. Some enterprises have even experienced oversupply and overflow of orders due to the obvious improvement of technology and services.

Figure: Green fast casting factory that has maturely applied 3DP sand printing technology In the face of 3DP sand printing equipment of various brands on the market, price, performance, stability, use and maintenance costs are usually the factors that users will consider when purchasing. Ltd., a 3D printing equipment and rapid manufacturing service provider, independently developed a production flagship product - Longyuan molding 3DP sand printing equipment AFS-J1600Pro, once the market is widely favored by the market, has been purchased by a number of foundry users for the production line, by virtue of the excellent molding accuracy, balanced and controlled casting technology. With excellent molding accuracy, balanced and controllable casting performance and excellent reliability, it has helped users to solve the contradiction between efficiency, strength and casting performance in casting production, and completed tens of millions of orders.

It is understood that the equipment molding cylinder size of 1600 × 800 × 600mm, using the latest generation of high stability, low noise, high-speed vibration powder laying technology and 2-Pass high-precision printing technology, with high-performance molding process and intelligent algorithms technology, can achieve 15 seconds per layer of the printing speed and the highest ± 0.3mm of the printing accuracy; print the tensile strength of the sand type can reach up to 2.5 MPa. The tensile strength of the printed sand mold can be up to 2.5MPa, air generation 8-11ml/g, and the surface roughness �?Ra25. The equipment adopts modular design, which is convenient and flexible for maintenance, with low maintenance cost; equipped with intelligent system, which makes the operation easier, and realizes one-button printing with the function of printing early warning prompts; it can also realize the real-time monitoring and record traceability of the whole process through the visual monitoring and other intelligent systems. For cast aluminum, cast iron, cast steel, cast magnesium and other different casting applications, to provide open source sand process solutions, supporting a wealth of sand systems and high-performance binder, curing agent, cleaning agent, to optimize the cost of use for users.

A user uses AFS-J1600Pro sand rapid casting process to produce a lightweight frame for a new energy vehicle company, and the finished aluminum alloy (ZL101) castings were delivered in 6 days. The dimensional accuracy of the finished product reaches CT7, the surface roughness is better than Ra12.5, and the casting surface is free of porosity and cracks, with complete shape and clear structure. Compared with the 40-day production cycle required by the traditional manufacturing process, the production cycle was shortened by 85% and the cost was reduced by 32% by using 3DP sand-printed rapid casting.

A user through the AFS-J1600Pro sand rapid casting process for a car factory trial production of engine block, due to the complexity of the cylinder structure, and small wall thickness, if the traditional method of production cycle takes more than 1 month. 3DP sand printing equipment produced by the sand mold, precision and strength than the traditional process have been greatly improved, the tensile strength of up to 2MPa, the casting surface roughness of better than Ra12.5, defect control is good, no flesh, pores, cracks, slag, no surface defects and defects. It only took 10 days to deliver the finished castings of gray cast iron (HT250), shortening the production cycle by 2/3 and reducing the cost by 30%.
"Fourteen-Five" is China's economic restructuring, industrial restructuring and upgrading of an important stage, but also an important period of accelerated development of China's foundry industry. Some foundry enterprises are still due to high energy consumption, high pollution, product precision does not meet the requirements, recruitment difficulties and other issues and troubled, deep in the capital, technology, orders in the cycle of the circle of uncertainty and confusion. It is recommended that these business operators should be early out of the inherent thinking, in a deep understanding and comprehension of the national policy on the basis of the initiative to seek change, change the way of thinking and development, through technology, process transformation and upgrading, take the green, intelligent, high-end road of sustainable development, in order to seize the opportunity to break out of the predicament.

转型压力下的铸造业如何破局突围最先出现在三帝科技股份有限公司�?/p>

Sand 3D Printing The most complete on the net - SANDY TECHNOLOGY CO.

3dptek — Tue, 30 May 2023 09:07:00 +0000

May 8, the 21st China International Foundry Expo in Tianjin - National Convention and Exhibition Center grand opening, attracting nearly 1,000 well-known enterprises from more than 30 countries and regions and tens of thousands of professional visitors to the event.

(hereinafter referred to as "SANDI"), a new generation of 3D printing equipment and rapid manufacturing service provider, comprehensively demonstrated 3D printing green rapid casting solutions such as 3DP/SLS sand rapid casting and SLS wax precision casting. (hereinafter referred to as "Longyuan Molding") won the "National Foundry Equipment Innovation Award" for its self-developed 3DP sand printing equipment AFS-J1600Pro.

Figure: Longyuan Molding 3DP Sand Printing Machine AFS-J1600Pro

AFS-J1600Pro equipment adopts international first-line high-precision, high-throughput nozzle, with high-performance molding process and intelligent algorithm technology, which can provide users with excellent molding accuracy, balanced and controllable casting performance and excellent reliability. The equipment is equipped with a new generation of high-speed vibration type powder spreading system, automatic feeding system and self-developed equipment control software, etc., sand size accuracy, high strength, low gas generation, excellent surface quality; equipment operation is simple, stable and reliable, with printing warning prompts, visual monitoring of the intelligent system can realize the whole process of processing of real-time monitoring and record traceability; open-source material process, can be adjusted for the user as needed; Matching high-performance resin binder, curing agent, cleaning agent, to ensure the molding quality and stability. The equipment can be widely used in aerospace and military, automotive, rail transportation, ship pumps and valves, construction machinery and other fields.

Figure: Oil filter holder 3DP sand mold, casting

Figure: New energy vehicle motor shell 3DP sand mold, castings and motor end cover castings

During the same period, the art sculpture "The Heroic Winds of the Han Dynasty" by Tongling Bronze Age Sculpture Co.

During the exhibition, SANDI Technology conducted an online live broadcast entitled "3DP Sand Printing Technology in Green Intelligent Casting Application Practice" through NJB Live Platform, which was jointly presented by Dr. Zhao Hao, Vice President of Product Technology of SANDI Technology, and Mr. Tan Dawei, General Manager of Xinxin Foundry, and attracted thousands of viewers to pay attention to the interaction.

In 2023, the Ministry of Industry and Information Technology, the National Development and Reform Commission, the Ministry of Ecology and Environment jointly issued the "Guidance on Promoting the High-Quality Development of the Foundry and Forging Industry" (Ministry of Industry and Information Technology Joint Communication and Installation �?023�?No. 40), it is clearly pointed out that, by 2025, the focus of the field of high-end castings, forgings, breakthroughs in the core technology, mastering a number of core technologies with independent intellectual property rights, integrated die-casting molding, moldless casting, sand molding 3D printing, ultra-high-strength steel hot forming, precision cold temperature hot forging, lightweight high-strength alloys lightweight and other advanced process technologies to achieve industrialization and application, in the key tasks put forward to "develop advanced casting technology and equipment", focusing on the development of "short process casting, sand 3D printing and other advanced casting technology and equipment. ."

Dr. Zhao Hao analyzed and interpreted the role and business opportunities of 3DP sand printing technology in green rapid casting in his report, and shared the molding process, intelligent algorithm technology, and sand process solutions of the company's self-developed 3DP inkjet sand printing equipment.

He said that 3DP sand printing technology in green intelligent casting can be mainly used for complex, high-end product manufacturing, such as aerospace, military and other fields, improve product structure design, improve product performance; rapid R & D trial production, such as new energy automotive parts and components of the R & D trial production, to reduce the mold investment and waste, and improve the production environment; small batch multi-species manufacturing, such as ships, pumps and valves, equipment and instruments and other fields, data Data-driven, rapid flexibility, accelerate new product development. By joining hands with Xinxin Casting, SANDI can provide users with one-stop, full-process rapid casting delivery solutions.

Tan Dawei, General Manager of Xinxin Casting, further shared the process flow of 3DP sand green fast casting through several typical application cases of 3DP sand printing in actual casting production, and analyzed the positive impacts brought by 3DP technology in terms of delivery cycle, cost of small batch production, mold accuracy and economic benefits.

Through the deep cooperation with SANDI Technology, Xinxin Foundry became the first foundry in Shaanxi Province to introduce the advanced technology of 3DP sand printing fast casting, and successfully transformed into a green fast casting demonstration factory.

The exhibition will last until May 11th, China National Convention and Exhibition Center (Tianjin), SANDI Technology booth: Hall S13 - Booth D07, welcome to visit and communicate with us!